platform.h File Reference

Platform-specific BSP430 configuration directives for MSP-EXP430F5529 USB LaunchPad More...

#include <bsp430/platform.h>

Go to the source code of this file.

Macros
#define	BSP430_PLATFORM_EXP430F5529LP   1
#define	BSP430_CLOCK_NOMINAL_XT2CLK_HZ   4000000UL

Detailed Description

Platform-specific BSP430 configuration directives for MSP-EXP430F5529 USB LaunchPad

The following platform-specific features are supported:

• vBSP430platformSpinForJumper_ni The jumper for this platform is P2.0, located at the top right of header J5 on the right of the board below the JTAG header. Place the jumper between GND and P2.0.

• BSP430_PERIPH_EXPOSED_CLOCKS Clocks are made available with ACLK on J8 (connected to red LED); SMCLK on P2.2 at J5.6; MCLK on P4.0 at J5.15.

  Warning

  MCLK is exposed through the port mapping function. When BSP430_PERIPH_EXPOSED_CLOCKS is enabled the UCA1CLK function normally assigned to this pin is not available.

Homepage

http://github.com/pabigot/bsp430

Copyright

Copyright 2012-2014, Peter A. Bigot. Licensed under BSD-3-Clause

Macro Definition Documentation

#define BSP430_CLOCK_NOMINAL_XT2CLK_HZ   4000000UL

EXP430F5529LP has a 4MHz XT2

#define BSP430_PLATFORM_EXP430F5529LP   1

Unconditionally define this, so as to produce errors if there is a conflict in definition.