Here is a list of all documented struct and union fields with links to the struct/union documentation for each field:
- r -
- r1_Ohm
: nrfcxx::sensor::adc::voltage_divider
- r2_Ohm
: nrfcxx::sensor::adc::voltage_divider
- radio_n16
: nrfcxx::sd::TelemetryBeacon::frame_s
- ram_delta()
: nrfcxx::sd::Broadcaster
- rate()
: nrfcxx::clock::clock_shift
- RATE_DENOM
: nrfcxx::clock::clock_shift
- raw
: nrfcxx::sensor::ccs811::observations_type
- read()
: nrfcxx::board::iox_pin
, nrfcxx::gpio::generic_pin
, nrfcxx::gpio::gpio_pin
, nrfcxx::gpio::pin_reference
, nrfcxx::periph::QSPI
, nrfcxx::periph::TWI
, nrfcxx::periph::UART
- read_device_info()
: nrfcxx::sensor::sdp8xx
- read_eic()
: nrfcxx::sensor::sht21
- read_sr()
: nrfcxx::periph::QSPI
- READY
: nrfcxx::sd::Beacon
- ready
: nrfcxx::sd::GenericBeacon< CONTENT_TYPE, ID >
- record_change_bi()
: nrfcxx::sensor::contact
- recorded_state_bi_()
: nrfcxx::sensor::contact
- reduced_timestamp_type
: nrfcxx::sensor::contact
- REGION_BEGIN
: nrfcxx::utility::Persist
- REGION_END
: nrfcxx::utility::Persist
- release()
: nrfcxx::periph::ADCClient
, nrfcxx::periph::GPIOTE
, nrfcxx::periph::PPI
, nrfcxx::periph::QSPI
- reload_cache()
: nrfcxx::misc::sx1509b
- reps()
: nrfcxx::led::Pattern
- request()
: nrfcxx::periph::PPI
- reset()
: nrfcxx::clock::uptime::timestamp24
, nrfcxx::event_set
, nrfcxx::lpm::state_machine
, nrfcxx::periph::TIMER::timestamp_type
, nrfcxx::sensor::ccs811
, nrfcxx::sensor::sdp8xx
, nrfcxx::sensor::sht21
, nrfcxx::systemState
- reset_cnt
: nrfcxx::sd::TelemetryBeacon::frame_s
- reset_count
: nrfcxx::sd::SystemStateBeacon::frame_s
, nrfcxx::systemState::state_type
- RESET_DELAY_ms
: nrfcxx::sensor::sdp8xx
, nrfcxx::sensor::sht21
- RESET_DELAY_us
: nrfcxx::sensor::ccs811
- reset_interval()
: nrfcxx::sd::Beacon
- reset_periph_()
: nrfcxx::periph::TWI
- reset_reas
: nrfcxx::sd::SystemStateBeacon::frame_s
, nrfcxx::systemState::state_type
- RESET_REAS_CONTROLLED
: nrfcxx::systemState::state_type
- RESET_REAS_DIF
: nrfcxx::systemState::state_type
- RESET_REAS_DOG
: nrfcxx::systemState::state_type
- reset_reas_enum
: nrfcxx::systemState::state_type
- RESET_REAS_FAILSAFE
: nrfcxx::systemState::state_type
- RESET_REAS_HARDWARE_Msk
: nrfcxx::systemState::state_type
- RESET_REAS_INTERNAL
: nrfcxx::systemState::state_type
- RESET_REAS_LOCKUP
: nrfcxx::systemState::state_type
- RESET_REAS_LPCOMP
: nrfcxx::systemState::state_type
- RESET_REAS_NFC
: nrfcxx::systemState::state_type
- RESET_REAS_OFF
: nrfcxx::systemState::state_type
- RESET_REAS_PROGRAMMATIC
: nrfcxx::systemState::state_type
- RESET_REAS_RESETPIN
: nrfcxx::systemState::state_type
- RESET_REAS_SDFAULT
: nrfcxx::systemState::state_type
- RESET_REAS_SREQ
: nrfcxx::systemState::state_type
- reset_reas_type
: nrfcxx::systemState::state_type
- RESET_REAS_VBUS
: nrfcxx::systemState::state_type
- RESET_REAS_WDTBARKED
: nrfcxx::systemState::state_type
- reset_utt
: nrfcxx::sensor::ccs811::retained_state_type
- resetn
: nrfcxx::sensor::ccs811::iface_config_type
- resetn_psel
: nrfcxx::misc::sx1509b::iface_config_type
- restore()
: nrfcxx::utility::Persist
- restore_from_persisted()
: nrfcxx::sensor::ccs811
- result()
: nrfcxx::periph::details::scoped_enabler< PERIPH >
, nrfcxx::sensor::ccs811::scoped_enabler
- retain_baseline()
: nrfcxx::sensor::ccs811
- retained_state()
: nrfcxx::sensor::ccs811
- rx_break_errors
: nrfcxx::periph::UART::statistics_type
- rx_count
: nrfcxx::periph::UART::statistics_type
- rx_dropped
: nrfcxx::periph::UART::statistics_type
- rx_frame_errors
: nrfcxx::periph::UART::statistics_type
- rx_overrun_errors
: nrfcxx::periph::UART::statistics_type
- rx_parity_errors
: nrfcxx::periph::UART::statistics_type