Here is a list of all documented struct and union fields with links to the struct/union documentation for each field:
- a -
- a
: nrfcxx::sensor::adc::SteinhartHart
- abs_cPa
: nrfcxx::sd::EnvSensorBeacon::threshold_s
- ABSOLUTE_ZERO_cCel
: nrfcxx::sensor::adc::ntcThermistor
- activate()
: nrfcxx::periph::QSPI
, nrfcxx::sd::Beacon
- active()
: nrfcxx::clock::alarm
, nrfcxx::clock::lfclk
, nrfcxx::led::Pattern
- ACTIVE
: nrfcxx::sd::Beacon
- active_drive_mode()
: nrfcxx::sensor::ccs811
- active_ds
: nrfcxx::sensor::ccs811::system_beacon_type
- active_signal()
: nrfcxx::gpio::active_signal< ACTIVE_HIGH >
- addrconf
: nrfcxx::periph::QSPI::configuration_type
- addReplace()
: nrfcxx::utility::Persist
- address
: nrfcxx::misc::sx1509b::iface_config_type
, nrfcxx::sd::Broadcaster
, nrfcxx::sensor::hts221::iface_config_type
, nrfcxx::sensor::lps22hb::iface_config_type
, nrfcxx::sensor::sdp8xx::iface_config_type
, nrfcxx::sensor::sht21::iface_config_type
- adv_cnt()
: nrfcxx::sd::Beacon::telemetry_state_type
, nrfcxx::sd::TelemetryBeacon::frame_s
- aggr_adv_cnt()
: nrfcxx::sd::Beacon::telemetry_state_type
- aggr_sec_cnt()
: nrfcxx::sd::Beacon::telemetry_state_type
- aggregate_state()
: nrfcxx::periph::GPIOTE::sense_status_type
- alarm()
: nrfcxx::clock::alarm
- align_bits
: nrfcxx::utility::memory_pool< ALIGN_BITS >
- allocate()
: nrfcxx::periph::GPIOTE
, nrfcxx::utility::memory_pool< ALIGN_BITS >
- app_crc
: nrfcxx::sd::ApplicationIdBeacon::frame_s
- APP_FRAME_TYPE_BASE
: nrfcxx::sd::Beacon
- APP_FRAME_TYPE_LIMIT
: nrfcxx::sd::Beacon
- app_handler_
: nrfcxx::systemState
- app_handler_type
: nrfcxx::systemState
- APP_START_DELAY_utt
: nrfcxx::sensor::ccs811
- app_version
: nrfcxx::sensor::ccs811::system_beacon_type
- appid_beacon
: nrfcxx::sd::Broadcaster
- ApplicationIdBeacon()
: nrfcxx::sd::ApplicationIdBeacon
- as_day_text()
: nrfcxx::clock::uptime
- as_text()
: nrfcxx::clock::uptime
- assert()
: nrfcxx::gpio::active_signal< ACTIVE_HIGH >
, nrfcxx::gpio::instr_psel< PSEL >
, nrfcxx::gpio::instr_psel_scoped< INSTR_PSEL >
, nrfcxx::sensor::ccs811::scoped_enabler
- asserted()
: nrfcxx::gpio::active_signal< ACTIVE_HIGH >
- autoenable()
: nrfcxx::periph::UART
- AUX
: nrfcxx::nrf5::peripheral< S >
- available()
: nrfcxx::utility::memory_pool< ALIGN_BITS >
, nrfcxx::utility::Persist